Change the car oil is a fairly standard procedure. Although it is technically considered maintenance, execution of an oil change is no more difficult than filling with gas or wiper replacement, it is usually just enough time for a little ".
The first thing to do before you start is to change the oil in your car to determine what type of oil your car uses and how much. Also, to determine what is the oil filter is used. For this information refer to the manual to see an automobile repair shop on site or online.
Then gather the necessary tools. The main tools are a wrench-end or exit to remove the drain plug, as a golden oil and paper towels. Optional elements (to protect the hand of the heat of the engine), a funnel, a work glove, and an oil filter wrench.
Keys oil filters come in two main styles, and if you buy one, be aware that the accessibility of the oil filter must be at least a little "to the style you have determined will. If there are a lot of space after the end of the filter (can easily look to the rotational axis), with a filter, mounted with a socket wrench is. you can use a socket. If there is a lot of space on the side of the filter, but not much space to the end, a strap wrench type of filter easier be handled.
To do the actual work, you drive the car a little, then turn off and let cool for at least 15 minutes. This heats the oil flowing so it is better, but leaves time to return to flow down the engine. Search the underside of the engine. The engine is bolted different accessories to it, but at the deepest point of the motor is a bolt that does not guarantee that other parties. This is the drain plug. Place the oil pan under the bolt, and remove with a socket wrench or box-end. If your oven has a mesh cover, the plug is to be successful. Otherwise, try it for Ahold, as he is finally free.
Once the oil is draining, double check to make sure it goes to sink when the flow slows down, then move the oil filter. This should be easy to spot - the new reference offer for what you are looking for. If it's not too tight, it should be easy to remove. Twisting left and tighten the engine. If it does not move, use the filter wrench to loosen it. If the oil filter is loose, dripping oil, rock side of the engine as soon as possible. Apply some oil to clean the rubber gasket of the new filter and turn in the right position. Fingers a little tighter now, the maximum recommended torque.
Then replace the drain plug. This can be applied more accurately, as is usually not a rubber seal, and can easily be removed with a greater mechanical advantage.Locate the oil filler port on the top of the engine (usually a black cap with "oil" or a symbol). If necessary, refill theengine oil with the manufacturer's specifications, using the funnel.
Article Source: http://EzineArticles.com
The first thing to do before you start is to change the oil in your car to determine what type of oil your car uses and how much. Also, to determine what is the oil filter is used. For this information refer to the manual to see an automobile repair shop on site or online.
Then gather the necessary tools. The main tools are a wrench-end or exit to remove the drain plug, as a golden oil and paper towels. Optional elements (to protect the hand of the heat of the engine), a funnel, a work glove, and an oil filter wrench.
Keys oil filters come in two main styles, and if you buy one, be aware that the accessibility of the oil filter must be at least a little "to the style you have determined will. If there are a lot of space after the end of the filter (can easily look to the rotational axis), with a filter, mounted with a socket wrench is. you can use a socket. If there is a lot of space on the side of the filter, but not much space to the end, a strap wrench type of filter easier be handled.
To do the actual work, you drive the car a little, then turn off and let cool for at least 15 minutes. This heats the oil flowing so it is better, but leaves time to return to flow down the engine. Search the underside of the engine. The engine is bolted different accessories to it, but at the deepest point of the motor is a bolt that does not guarantee that other parties. This is the drain plug. Place the oil pan under the bolt, and remove with a socket wrench or box-end. If your oven has a mesh cover, the plug is to be successful. Otherwise, try it for Ahold, as he is finally free.
Once the oil is draining, double check to make sure it goes to sink when the flow slows down, then move the oil filter. This should be easy to spot - the new reference offer for what you are looking for. If it's not too tight, it should be easy to remove. Twisting left and tighten the engine. If it does not move, use the filter wrench to loosen it. If the oil filter is loose, dripping oil, rock side of the engine as soon as possible. Apply some oil to clean the rubber gasket of the new filter and turn in the right position. Fingers a little tighter now, the maximum recommended torque.
Then replace the drain plug. This can be applied more accurately, as is usually not a rubber seal, and can easily be removed with a greater mechanical advantage.Locate the oil filler port on the top of the engine (usually a black cap with "oil" or a symbol). If necessary, refill theengine oil with the manufacturer's specifications, using the funnel.
Article Source: http://EzineArticles.com
|
|
|
|
0 comentários:
Postar um comentário